Diamond Wire Loops
Diamond Wire Loops are cutting tools in which a wire surface is coated with diamond crystals. They are suitable for separating various materials such as sapphire and ceramic as well as tires, rubber, stone, monocrystalline and polycrystalline silicon, but also composites and many more.
The economical and fast separation process (5-60 m/s wire speed) produces only a small cutting gap and thus little material losses.
Our special Multi-Strand Diamond Wire Loops are manufactured according to a patented process and have up to 3 times longer life time than the diamond wire loops commonly available on the market.
Test our Diamond Wire Loops. Please tell us the material to be cut as well as the required wire length, which is given by your diamond wire saw. [Nbsp]
|MS-045D-D76-C50-xxxxL||0,43 - 0,47||63 - 75||800 - 5.000||60|
|MS-060D-D76-C50-xxxxL||0,58 - 0,62||63 - 75||800 - 5.000||100|
|MS-065D-D107-C50-xxxxL||0,63 - 0,67||90 - 106||800 - 10.000||100|
|MS-070D-D126-C50-xxxxL||0,68 - 0,72||106 - 125||1.000 - 10.000||100|
|MS-180D-D213-C50-xxxxL||1,78 - 1,82||180 - 212||4.000 - 10.000||200|
|MS-250D-D213-C50-xxxxL||2,48 - 2,52||180 - 212||5.000 - 10.000||300|
The specified values can differ by up to 2%.
Explanation, for example: MS-065D-D107-C50-xxxxL:
MS - multi strand wire +++++ 065D - 0.65 mm outer diameter +++++++ D107 - diamond grain size
C50 - occupancy density ++++++ xxxxL - your desired loop length, for example 4000L means 4000 mm long
Standard lengths for continuous Diamond Wire Loops are: 840 - 1600 - 1870 - 2000 - 2100 - 3000 - 4000 - 4430 - 8000 mm.
Other lengths up to 20.000 mm on request.
Attention: Our new Multi-Strand Diamond Wire Loops ensure a service life that is up to 3 times longer! A test is worthwhile.